เครื่องสกัดกากใยในตัวอย่างแบบกึ่งอัตโนมัติ
ดาวน์โหลดเอกสาร
Hot extraction according to
Randall - the quicker extraction method
The semi-automatic extraction
systems ES 2+2 / ES 6 save time and costs by a fast extraction.
The hot extraction system
following Randall is several times faster than the conventional Soxhlet
extraction.
Boiling
During the first step, the
extraction sleeve is with the sample in the vessel with the boiling extractant,
like a tea bag in a cup with hot water. Most of the substance that is to be
extracted enters the solution in this step and distributes itself in the
solvent.
The upper part of the device
acts simply like a reflux cooler; the condensate drips into the extraction
sleeve and helps bring the substance into the solution.
Rinsing
In a second step, the
extraction sleeve is pulled out of the sump. Extract still adheres to it; and
there still might be substance in the sample that has not yet dissolved. The
condensate from the cooler rinses the extract and little by little dissolves
the undissolved parts.
If you wish to further process
the extract, this means the extraction is complete at this stage. Otherwise,
you remove the solvent in a third step.
Recovery
When evaporating, close the
return cock on the cooler, the condensate collects in the lower part of the
cooler; you can reuse it for the next extraction. Thanks to the short routes of
the device, the sample can be evaporated until it is virtually dry.
·
Step-by-step user-friendly
instructions on the display
·
One heating program for all sample
positions, but separate heating for each sample position
·
Cooling water manifold ensures
uniform cooling at all sample locations
·
Low solvent losses due to the
specially designed behrotest® coolers
·
31 freely configurable programs for
your individual extraction applications
·
behr one-button operation for
particularly fast and easy programming
·
Audible and visual error messages
·
Integrated overtemperature
protection
·
Resource-saving cooling water saving
program