ยังไม่มีสื่อแสดงผล
คุณสมบัติและข้อมูลเชิงเทคนิค
Temperature
|
Setting temperature range |
without light, with humidity: +5 to +70 °C |
|
Setting temperature range |
with light, with humidity: +5 to +70 °C |
|
Setting temperature range |
with light, without humidity: 0 to +70 °C |
|
Setting temperature range |
without light, without humidity: 0 to +70 °C |
|
Working temperature range |
with light, without or with humidity: 15 to +40 °C |
|
Working temperature range |
without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C |
|
Working temperature range |
without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C |
|
Setting accuracy temperature |
0.1 °C |
|
Temperature sensor |
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error |
Humidity
|
Setting range humidity |
10 - 90 % rh |
|
Humidity |
humidity supply with distilled water from external tank by self-priming pump |
|
Humidification |
humidification by hot steam generator |
|
Dehumidification |
dehumidification by cold trap using the Peltier technology |
|
Setting accuracy humidity |
0.5 % rh |
Control technology
|
ControlCOCKPIT |
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays. |
|
Language setting |
German, English, Spanish, French, Polish, Czech, Hungarian |
|
adjustable parameters |
temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones, summertime/wintertime |
|
Timer |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
|
Function HeatBALANCE |
adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 % |
|
Function SetpointWAIT |
the process time does not start until the set temperature is reached |
|
Calibration |
three freely selectable values each, temperature and humidity |
Communication
|
Interface |
Ethernet LAN, USB |
|
Documentation |
programme stored in case of power failure |
|
Programming |
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
Safety
|
Temperature control |
over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display |
|
AutoSAFETY |
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature |
|
Autodiagnostic system |
integral fault diagnostics for temperature and humidity control |
|
Alarm |
visual and acoustic |
Heating concept
|
Peltier |
energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle) |
Standard equipment
|
Works calibration certificate |
standard values +10 °C and +37 °C, 60 % rh at +30 °C |
|
Door |
fully insulated stainless steel door with 2-point locking (compression door lock) |
|
Door |
inner glass door |
|
Internals |
2 stainless steel grid(s), electropolished |
|
Standard accessories |
Water tank including connection hose |
Stainless steel interior
|
Dimensions |
w(A) x h(B) x d(C): 640 x 800 x 500 mm (d less 10 mm for fan - Peltier) |
|
Volume |
256 l |
|
Max. number of internals |
9 |
|
Max. loading of chamber |
200 kg |
|
Max. loading per internal |
20 kg |
Textured stainless steel casing
|
Dimensions |
w(D) x h(E) x d(F): 824 x 1183 x 756 mm (d +56mm door handle) |
|
Housing |
rear zinc-plated steel |
Electrical data
|
Voltage Electrical load |
230 V, 50/60 Hz |
|
Voltage Electrical load |
115 V, 50/60 Hz |
Ambient conditions
|
Set Up |
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
|
Ambient temperature |
16 ºC to 40 ºC |
|
Humidity rh |
max. 70 %, non-condensing |
|
Altitude of installation |
max. 2,000 m above sea level |
|
Overvoltage category |
II |
|
Pollution degree |
2 |
Packing/shipping data
|
Transport information |
The appliances must be transported upright |
|
Customs tariff number |
8419 8998 |
|
Country of origin |
Federal Republic of Germany |
|
WEEE-Reg.-No. |
DE 66812464 |
|
Dimensions approx incl. carton |
w x h x d: 930 x 1380 x 930 mm |
|
Net weight |
approx. 122 kg |
|
Gross weight carton |
approx. 173 kg |
1. เป็นตู้เพาะเชื้อที่มีโครงสร้างทำด้วยโลหะไร้สนิม ทั้งภายในและภายนอก โดยมีแผ่นด้านหลังเครื่องทำด้วยโลหะเคลือบกันสนิม
2. มีขนาดความจุภายใน 256 ลิตร มีขนาดภายใน 640x800x500 มม. และมีขนาดภายนอก 824x1183x756 มม.
3. ประตูตู้เป็นแบบ 2 ชั้น ชั้นนอกทำด้วยโลหะไร้สนิม และชั้นในเป็นกระจกใส โดยมีด้ามจับยาวตลอดแนวประตูสำหรับเปิด-ปิดประตูชั้นนอกและล็อคได้อย่างสะดวก
4. มีชั้นวางของภายในตู้ทำด้วยโลหะไร้สนิม จำนวน 2 ชั้น โดยสามารถปรับได้ 9 ระดับ
5. ควบคุมการทำงานด้วยระบบ multifunctional digital PID-microprocessor มีหน้าจอแสดงผลแบบ TFT-colour display ให้ความคมชัดสูง แบบสองหน้าจอ โดยตั้งการทำงานด้วยระบบ Multi-Touchscreen
6. สามารถปรับตั้งค่าใช้งานผ่าน ControlCOCKPIT ของค่าใช้งานต่าง ๆ เช่น อุณหภูมิ, ความชื้น, โปรแกรมเวลา และค่าอื่น ๆ
7. แสดงค่าเป็นแบบตัวเลข มีหัววัดอุณหภูมิเป็นชนิด PT100 Sensor และมีชุดทำความเย็นอยู่ด้านหลังเครื่อง
ช่วงอุณหภูมิ :
5°C เหนืออุณหภูมิห้องถึง 70°C (without light/ with humid)
15°C เหนืออุณหภูมิห้องถึง 40°C (with light)
8. ควบคุมความชื้นได้ตั้งแต่ 10 ถึง 90 %rh without light / 85 %rh with light มีอุปกรณ์เป็นถังบรรจุน้ำต่อเข้าด้านหลังเครื่อง
9. ตั้งเวลาทำงานเป็นตัวเลขดิจิตอล สามารถตั้งเวลาได้ตั้งแต่ 1 นาที ถึง 99 วัน หรือสามารถตั้งโปรแกรมการทำงานได้หลายช่วงอุณหภูมิ โดยใช้ร่วมกับโปรแกรม AtmoCONTROL
10. สามารถเลือกให้เวลาที่ตั้งไว้เริ่มทำงานทันทีที่เปิดเครื่อง หรือเวลาที่ตั้งไว้เริ่มทำงานเมื่ออุณหภูมิถึงจุดที่ตั้ง
11. มีระบบควบคุมและป้องกันอุณหภูมิสูงเกินแบบตั้งปรับได้ แสดงค่าเป็นตัวเลข และมีสัญญาณเตือนแบบเสียง
12. มีโปรแกรมปรับเทียบค่าอุณหภูมิได้โดยตรงจากชุดควบคุมการทำงาน
13. มีช่อง Ethernet Interface สำหรับต่อกับคอมพิวเตอร์
14. ใช้ไฟฟ้า 220 โวลท์ 50 เฮิร์ท
15. เป็นเครื่องมือที่ผลิตจากบริษัทที่ได้รับการรับรองมาตรฐาน ISO9001
16. รับประกันคุณภาพ 1 ปี
อุปกรณ์เสริม
17. อุปกรณ์จุ่มวัดอุณหภูมิตามาตรฐาน NIST จำนวน 1 ชิ้น
Our constant climate chamber is tailored to environmental simulation, material testing and stability testing in accordance with the ICH guidelines.