ยังไม่มีสื่อแสดงผล
คุณสมบัติและข้อมูลเชิงเทคนิค
1. เป็นตู้อบความร้อนที่มีโครงสร้างทำด้วยโลหะไร้สนิม ทั้งภายในและภายนอก โดยมีแผ่นด้านหลังเครื่องทำด้วยโลหะเคลือบกันสนิม
2. มีขนาดความจุภายใน 449 ลิตร โดยมีขนาดภายใน 1040x720x600 มม. และมีขนาดภายนอก 1224x1247x784 มม. ฐานตู้มีล้อ 4 ล้อ ปรับล็อคได้
3. ประตูตู้ทำด้วยโลหะไร้สนิม โดยมีด้ามจับยาวตลอดแนวประตูสำหรับเปิด-ปิดและล็อคได้อย่างสะดวก
4. มีชั้นวางของภายในตู้ทำด้วยโลหะไร้สนิม จำนวน 2 ชั้น โดยสามารถปรับระดับได้ 8 ระดับ
5. ควบคุมการทำงานด้วยระบบ multifunctional digital PID-microprocessor มีหน้าจอแสดงผลแบบ TFT-colour display ให้ความคมชัดสูง แบบหน้าจอเดียว โดยตั้งการทำงานด้วยระบบ Multi-Touchscreen
6. สามารถปรับตั้งค่าใช้งานผ่าน ControlCOCKPIT ของค่าใช้งานต่าง ๆ เช่น อุณหภูมิ , ระดับพัดลม , ระดับช่องระบายอากาศ , โปรแกรมเวลา และค่าอื่น ๆ
7. ควบคุมอุณหภูมิได้ตั้งแต่ 10°C เหนืออุณหภูมิห้องถึง 300°C มีค่าละเอียดในการปรับตั้ง 0.1°C ในช่วงอุณหภูมิไม่เกิน 99.9 °C และค่าละเอียดในการปรับตั้ง 0.5°C จากอุณหภูมิ 100°C ขึ้นไป แสดงอุณหภูมิเป็นตัวเลข (LED) และมีหัววัดอุณหภูมิเป็นชนิด PT100 Sensor
8. มีระบบกระจายอุณหภูมิภายในตู้ให้สม่ำเสมอด้วยพัดลมแบบปรับระดับได้ (Force air)
9. มีระบบปรับการถ่ายเทอากาศระหว่างภายในและภายนอกตู้แบบปรับระดับได้ (Air flap)
10. มีช่องระบายอากาศสำหรับต่อออกภายนอกเครื่อง
11. มีสวิทซ์เปิด-ปิดเครื่อง และมีเมนูสำหรับเลือกตั้งให้เครื่องทำงานตามต้องการ
12. ตั้งเวลาทำงานเป็นตัวเลขดิจิตอล สามารถตั้งเวลาได้ตั้งแต่ 1 นาที ถึง 99 วัน
13. สามารถเลือกให้เวลาที่ตั้งไว้เริ่มทำงานทันทีที่เปิดเครื่อง หรือเวลาที่ตั้งไว้เริ่มทำงานเมื่ออุณหภูมิถึงจุดที่ตั้ง
14. มีระบบควบคุมและป้องกันอุณหภูมิสูงเกินแบบตั้งปรับได้ แสดงค่าเป็นตัวเลข
15. มีโปรแกรมปรับเทียบค่าอุณหภูมิได้โดยตรงจากชุดควบคุมการทำงาน
16. มีช่อง Ethernet Interface สำหรับต่อกับคอมพิวเตอร์
17. ใช้ไฟฟ้า 380 โวลท์ 50 เฮิร์ท (3 เฟสท)
18. มีเอกสารแต่งตั้งตัวแทนจำหน่ายโดยตรงจากบริษัทผู้ผลิต
19. เป็นเครื่องมือที่ผลิตจากบริษัทที่ได้รับการรับรองมาตรฐาน ISO9001
20. รับประกันคุณภาพ 1 ปี
Temperature
|
Working temperature range |
at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C |
|
Setting accuracy temperature |
up to 99.9 °C: 0.1 / from 100 °C: 0.5 |
|
Setting temperature range |
+20 to +300 °C |
|
Temperature sensor |
1 Pt100 sensor DIN class A in 4-wire-circuit |
Control technology
|
Language setting |
German, English, Spanish, French, Polish, Czech, Hungarian |
|
ControlCOCKPIT |
SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
|
Timer |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
|
Function SetpointWAIT |
the process time does not start until the set temperature is reached |
|
Calibration |
three freely selectable temperature values |
|
adjustable parameters |
temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
Ventilation
|
Fan |
forced air circulation by quiet air turbine, adjustable in 10 % steps |
|
Fresh air |
Admixture of pre-heated fresh air by electronically adjustable air flap |
|
Vent |
vent connection with restrictor flap |
Communication
|
Documentation |
programme stored in case of power failure |
|
Programming |
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
Safety
|
Temperature control |
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
|
Autodiagnostic system |
for fault analysis |
Standard equipment
|
Works calibration certificate |
Calibration at +160°C |
|
Door |
fully insulated stainless steel doors with 2-point locking (compression door lock) |
|
Internals |
2 stainless steel grid(s), electropolished |
Stainless steel interior
|
Dimensions |
w(A) x h(B) x d(C): 1040 x 720 x 600 mm (d less 39 mm for fan) |
|
Interior |
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
|
Volume |
449 l |
|
Max. number of internals |
8 |
|
Max. loading of chamber |
300 kg |
|
Max. loading per internal |
30 kg |
Textured stainless steel casing
|
Dimensions |
w(D) x h(E) x d(F): 1224 x 1247 x 784 mm (d +56mm door handle) |
|
Installation |
on lockable castors |
|
Housing |
rear zinc-plated steel |
Electrical data
|
Voltage Electrical load |
400 V and 3x 230 V w/o neutral, 50/60 Hz approx. 5800 W |
Ambient conditions
|
Set Up |
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
|
Altitude of installation |
max. 2,000 m above sea level |
|
Ambient temperature |
+5 °C to +40 °C |
|
Humidity rh |
max. 80 %, non-condensing |
|
Overvoltage category |
II |
|
Pollution degree |
2 |
Packing/shipping data
|
Transport information |
The appliances must be transported upright |
|
Customs tariff number |
8419 8998 |
|
Country of origin |
Federal Republic of Germany |
|
WEEE-Reg.-No. |
DE 66812464 |
|
Dimensions approx incl. carton |
w x h x d: 1330 x 1440 x 1050 mm |
|
Net weight |
approx. 161 kg |
|
Gross weight carton |
approx. 227 kg |
Standard delivery Universal oven
The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.